Table of Contents
Advertisement
Cleaning and maintenance
Cleaning the exterior of the air purifier
Dip a towel in warm water and wring it
out before using it to clean the product.
Use a cotton swab or exclusive cleaning
(superfine fiber) cloth to clean the groove.
If it's too hard to clean the dust on the
front cover, remove the cover and wash
it with water.
CAUTION
• Do not clean the air purifier with an alkali
detergent.
• Do not clean the surface of the air purifier
with sulfuric acid, hydrochloric acid or
organic solvent (thinner, kerosene, acetone,
etc.), or attach a sticker to the unit. This
may damage the surface of the air purifier.
Cleaning the sensors
If there's dust or foreign substances
on the sensor, use a vacuum cleaner to
clean the sensor and its surrounding.
If there's any foreign substances on the
sensor, it may not perform properly.
CAUTION
• Do not put any dust in the sensor parts.
Cleaning and replacing the filter
Removing the filter
1 Open the front cover
Press the top part of the product with
your thumb and pull the front cover
with other fingers.
2 Remove the Pre filter
3 Remove the Integrated filter
19
Advertisement
Table of Contents
