Table of Contents
Advertisement
Chapter 3 How to Use the Printer Driver
Changing the Ink Jetting Amount for Printing
Change the amount of ink used for printing.
You can adjust the overall density, changing color settings such as color balance and density to
exceed the setting range. You must first register a new paper type before increasing the ink jetting
amount for printing.
Important
• Up to 100 custom paper types can be registered.
• Pre-registered paper types cannot be changed. (Matte, Gloss, and Synthetic
• Administrative privileges over this printer are required to configure settings of this printer.
If a user without administrative privileges proceeds with configuration of settings, a message "You
do not have rights to printer management. Please contact your system administrator." appears.
For more details, see
• When increasing ink jetting amount for printing
Because this mode uses more ink than in usual printing, it may bleed through the paper, stain the
edges or back of the paper, or the transport area.
– Do not touch the printed surface until the ink dries.
– If the print is dirty, clean the transport area.
110
Administrative privileges required for certain features
「
）
P.96
（
） 」
.
Advertisement
Table of Contents
Troubleshooting
