Buffalo FB862 Instruction Manual page 13

11. Double cooking time
By using "X2" button, the user can easily set the doubled cooking time for a particular food item.
1. In Ready state, press "X2" button first, then within 5 seconds press a number button (0-9). The oven
will start cooking with the doubled cooking time. Or, press the number button (0-9) to start cooking
first, then within 5 seconds press "X2" button to start cooking with the doubled cooking time.
2. When pressing "X2", the display will show "doub". When pressing number buttons, the doubled
cooking time will be shown.
• For example, press the number button "5" (whose preset time is 1 minute) first. Then press "X2", the
total cooking time will change to 1:00*(1+0.8)=1:48 (1 minute and 48 seconds). Please note "0.8"
here means the default proportion setting for double cooking time.
3. When cooking program finishes, the oven will enter End of Cook Cycle Mode.
• Note: This function cannot be used under memory mode.
12. Stage Cooking Program
This function allows the user to cook food items at combination of various Power Levels. Three stages can
be set at most.
1. After setting cooking time and power for the first stage, press "
the same step to set the third stage.
2. Press " " to save.
Example: If desired to set a 3-stage cooking cycle as a memory program (The first stage is with cook
time of 1 minute and 25 seconds and power level PL7; the second stage with cook time of 5 minutes
and 40 seconds and power level PL5; the third stage with cook time of 1 minute and 30 seconds and
power level PL2), please follow below operations:
Step1: Open the door. Then press number button "1" for 5 seconds, "ProG" is shown.
Step2: Press the number button, e.g. "3", the program will be saved into "3". The default cooking
time "00:30" is shown.
Step3: Press number buttons "1", "2", "5" to set the cooking time. "1:25" is shown.
Step4:
Press . "PL7" is shown. Now the first stage is finished.
Step5:
Press . "S-2" is shown.
Step6: Press number buttons "5", "4", "0" to set the cooking time. "5:40" is shown.
Step7:
Press . "PL5" is shown. Now the second stage is finished.
Step8:
Press . "S-3" is shown.
Step9 Press number buttons "1", "3", "0" to set the cooking time. "1:30" is shown.
Step10
Press . "PL2" is shown. Now the third stage is finished.
Step11:
Press to save. "ProG" is shown again. When to use the program next time, just press
number button "3", the related program will start automatically.
FB862_ML_A5_v2_20220527.indb 13 FB862_ML_A5_v2_20220527.indb 13
EN
" to set the second stage. Then
13
2022/5/27 10:21 2022/5/27 10:21