Select Dial Mode
1. Press the
key repeatedly until BASE appears.
2. Press the
3. Press
or
key to select DIAL MODE.
4. Press the
5. Press
or
key to select TONE or PULSE.
6. Press the
Changing the PIN
1.
Press the
key as often as necessary until the BASE menu appears.
2.
Press the
3.
Press the
or
4.
Press the
5.
Enter the old PIN (0000).
6.
Press the
7.
Enter the new PIN (e.g. 1111).
8.
Press the
9.
Enter the new PIN again (e.g. 1111).
10.
Press the
Restore Base Settings
1.
Press the
key as often as necessary until the BASE menu appears.
2.
Press the
3.
Press the
or
4.
Press the
5. Enter the 4-digit PIN code (pre-set code 0000).
6. Press the
7. Press the
Default Settings
E.G. PIN NO - 0000
DIAL MODE - TONE
FLASH TIME - 100 / 250 / 600
EMERGENCY NO - EMPTY
BARRING - EMPTY
Deregister Handset
If several handsets are registered on one base station, they can deregister each other
mutually. The last handset cannot be deregistered.
1.
Press the
key as often as necessary until the BASE menu appears.
2.
Press the
3.
Press the
or
4.
Press the
5.
Enter the PIN. Note: (Factory setting is 0000).
6.
Press the
7.
If necessary, use the
8.
Press the
9.
Press the
36
key.
key.
key to confirm the setting.
key.
as often as necessary to select the CHANGE PIN submenu.
key.
key.
key.
key to confirm the setting.
key.
as often as necessary to select the required DEFAULT submenu.
key.
key, "CONFIRM?" appears.
key again to confirm.
key.
as often as necessary to select the DEREGISTER submenu.
key.
key.
or
key to select the handset.
key.
key to confirm the setting.
35