Table of Contents
Advertisement
HOW TO USE THE REMOTE TO CONTROL YOUR TV
HOW TO USE THE REMOTE TO CONTROL YOUR TV
POWER button
Press this button to turn the TV set on or off. If an automatic message is
set, it will be displayed when the TV is first turned on. (See page 41.)
RECALL button
When you want to check the channel being received, or if it has a stereo
(ST) or second audio program (SAP), press the RECALL button.
You can check the time, and if the ON TIME or OFF TIME has been set.
(See page 40.)
You can also use the RECALL button to quickly clear many of the other
on-screen displays.
Click to see the Remote.
ANT button
Use the ANT (Antenna) button to select between the VHF/UHF and AUX
(Auxiliary) antenna inputs.
NOTE: When VHF/UHF is selected, the channel number in the upper right
corner of the screen is green. When the AUX input is selected, the channel
number is in yellow.
MENU, ENTER, CURSOR buttons
All the on-screen display features can be set or adjusted by using these
buttons.
The "MENU" button will start or exit the on-screen display.
The "CURSOR" buttons will highlight functions or adjust different features.
24
Advertisement
Table of Contents
