CHAPTER 3 MECHANICAL SYSTEM
E.
Paper Delivery Unit Sensor
1) Remove the paper feed motor accord-
ing to the instructions in the proce-
dure for removing the paper feed
motor (on page 3-12).
2) Remove the paper feed PCB accord-
ing to the instructions in the proce-
dure for removing the paper feed PCB
(on page 3-13).
3) Remove the two screws, three tabs
and the gear cover.
[4]
[1]
[1] Screw
[2] Hook
[3] Gear cover
[4] Paper delivery unit sensor
Figure 3-209
4) Remove the connector, four hooks
and the delivery unit sensor.
3-8
COPYRIGHT © 1999 CANON INC.
F.
1) Remove the delivery unit according to
2) Remove the delivery cover.
3) Remove the connector, four hooks
[3]
[2]
CANON 2 × 500 SHEET PAPER DECK-C1 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Registration Paper Sensor,
Jam Sensor
the instructions in the procedure for
removing the delivery unit (on page 3-
4).
and the sensor.