Operation; Balancing The Ensemble Volume (Tg Master Balance) - Yamaha disklavier Mark III Series Maintenance Handbook

OPERATION

Functionality is the same as with previous models. As the controller is more compact and the dial has been
omitted, however, operations must be carried out using the [-/NO] and [+/YES] buttons.
1. Switch on the Amplifier Unit's main switch first, and then switch on the control-box switch.
2. Volume Control
(1) Balancing the Ensemble Volume
(2) Balancing the CD Volume

Balancing the Ensemble Volume (TG Master Balance)

When playing back Ensemble songs, it is useful to be able to balance the volume levels of the piano and
Ensemble voices. In other words, the volume of the XG tone generator should not be too loud or too quiet
compared to the piano played by the Disklavier.
Once you adjust the volume using the Tone Generator Master Balance function, you can use the [VOLUME]
buttons on the remote control to conveniently increase or decrease the overall volume in a normal fashion.
These balance settings are stored in the Control Unit, and are saved even when the Disklavier is turned off.
1
Play back an Ensemble song.
2
Press the Selector until the BALANCE indicator lights.
The following display appears.
3
Use the [–/NO] and [+/YES] buttons to adjust the volume of the internal XG tone generator.
TG Master balance can adjust the volume from 0 to 127 and OFF. (0: mutes the sound of the internal XG
tone generator; OFF: does not link with the internal XG tone generator.) This setting is shown in the dis-
play on the right of the bar graph.
Adjust the level so that the Ensemble voices played by the internal XG tone generator are balanced with the
volume of the Disklavier piano.
4
Press the Selector until the VOLUME indicator lights.
The volume levels of the piano and Ensemble voices are now balanced. You can use the [VOLUME] but-
tons on the remote control to increase or decrease the overall volume.
VOLUME
TEMPO
TRANSPOSE
BALANCE
–/NO +/YES
VOLUME
TEMPO
TRANSPOSE
BALANCE
18