Property Set Values And Default Values; Capability Set Value - Epson TM Series Development Manual

The read data will be displayed as the RawData as follows:
RawData: xxxxxx xxxxxx
Confirm the contents.
When the method is executed by OPOS_CH_INTERACTIVE, the character
strings of the CheckHealthText property are as follows.
"Interactive Hcheck: Canceled"
"Interactive Hcheck: Complete"
After executing the CheckHealth method, be sure to confirm the returned value. If
an error has occurred, there is no point in referring to the CheckHealthText
property. For details on the error, refer to the Section 6 of this manual.

3.2 Property Set values and Default Values

3.2.1 Capability Set Value

Capability Name
CapValidationDevice
CapPowerReporting
*1
For TM-U675 and the TM-H6000II/ TM-H6000III/ TM-H6000IV/ TM-H6000V/
TM-J7000/ TM-J7100 (EndorsUnit unsupported) only.
Table 1
Port Type
Serial
Parallel
USB
Ethernet
Bluetooth
:
:
Set Value
FALSE
CapPowerReporting
OPOS_PR_STANDARD
OPOS_PR_ADVANCED
OPOS_PR_ADVANCED
OPOS_PR_ADVANCED
OPOS_PR_STANDARD
10
APPLICATION DEVELOPMENT GUIDE
MICR (EPSON TM Series)
Version 3.00 Feb. 2019
When the [Close] button is pressed
without executing the [Read].
When the [Close] button is pressed after
executing the [Read].
*1
Set Value
See the table1.
TRUE