Copy An Id Card - Brother MFC-J3540DW Online User's Manual

Home > Copy > Copy an ID Card

Copy an ID Card

Use the [2in1(ID)] feature to copy both sides of an identification card onto one page, keeping the original
card size.
• Make sure the paper size is set to A4 or Letter.
• You may copy an identification card to the extent permitted under applicable laws. For more detailed
information, see the Product Safety Guide.
1. Place your identification card face down near the upper-left corner of the scanner glass.
2 in 1 ID (Vertical)
a
a
d
b
a. 3 mm or greater (top, left)
b. 145 mm
c. 2 in 1 ID (Vertical): 207 mm
2 in 1 ID (Horizontal): 102 mm
d. Scannable area
2. Press d or c to display
You can also press
3. Enter the number of copies in one of the following ways:
• Press [-] or [+] on the touchscreen.
• Press to display the keyboard on the touchscreen, and then enter the number of copies using the
touchscreen keyboard. Press [OK].
• Enter the number of copies using the dial pad.
4. To change the copy settings, press
5. Press [Mono Start] or [Colour Start].
The machine starts scanning one side of the identification card.
c
[2 in 1 ID Copy], and then press it.
[Copy] > [ID] for the [2in1 ID Vertical] setting.
[Options]. When finished, press [OK].
2 in 1 ID (Horizontal)
a
a
d c
b
171