Other Information; Troubleshooting - Sharp Tokyo User Manual

20
<Medium>, and <Low>.
Display language
To change the display language, long press
. Use to scroll and select <System> /
<Language>. Use
preferred language. There are 7 options available:
English, French, German, Italian, Spanish, Polish, and
Netherlands. An asterisk (*) will be displayed next to
the current language setting.

Other information

Software version
To check the software version of your radio, long
press . Use
<System> / <SW Version>. The software version will
be displayed.
Factory reset
You can reset your radio to restore it to the original
factory settings.
to scroll and select your
to scroll and select
Note: If you reset your radio, your stored presets will
be deleted and any connected Bluetooth device will
be unpaired.
Long press . Use
<System> / <Factory reset>. <Factory Reset? <No>
Yes> will be displayed. Use
select <Yes>. <Restarting...> will be displayed. After
a few seconds, the display will change to <SHARP
sharpconsumer.eu> and will then go to standby
mode.

Troubleshooting

If there is no sound or power:
• Adjust the volume.
• Check that the USB cable is connected and that the
radio is not in standby mode.
• If the product is powered using batteries, check if
they need to be replaced. Please use good quality
AA batteries.
to scroll and select
to scroll and