Step 4 Release 3P Cable from the ribs of the Front Panel
Block.
Caution: During assembling, dressed the 3P Cable into the
ribs of the Front Panel Block.
Step 5 Lift up to remove the Power Button P.C.B..
Caution: During assembling, ensure that the Power Button
P.C.B. is properly located and fully seated onto the Front
Panel Block.
12.8. Disassembly of Panel P.C.B.
• Refer to "Disassembly of Top Cabinet".
• Refer to "Disassembly of Tray Ornament".
• Refer to "Disassembly of Front Panel Block".
Step 1 Detach 21P FFC at the connector (P6001) on Panel
P.C.B..
Step 2 Remove 2 screws.
Step 3 Remove the Panel P.C.B..
Caution: During assembling, ensure that the Panel P.C.B.
is properly located & fully seated onto the bottom chassis.
53