Using The User Menu; Setting Desired Menu Pages On The User Menu - Sony HDC-900 Operation Manual

Using the USER Menu

You can select desired pages from the OPERATION,
PAINT, MAINTENANCE, FILE, and DIAGNOSIS
menu pages, and copy and set them on the USER
Menu. If you set pages frequently used on the USER
Menu, you can easily call the pages and use them.
On the USER Menu, USER PAGE 1 through USER
PAGE 5 are provided.
You can place up to ten desired menu items on each of
these pages.
Setting Desired Menu Pages on
the USER Menu
1
Display the TOP MENU screen.
For details on displaying the TOP MENU screen, see
"To display the TOP MENU screen:" on page 19(E).
2
Turn the MENU SELECT knob to select USER
MENU CUSTOMIZE, then push the MENU
SELECT switch toward ENTER.
The PAGE EDIT screen appears.
Upon setting of numbers 1 through 5, USER
PAGE 1 through USER PAGE 5 have been set.
You can change these settings as desired.
3
Turn the MENU SELECT knob to select the
number for which the menu page is to be set, then
push the MENU SELECT switch toward ENTER.
The operation select screen appears.
4
Turn the MENU SELECT knob to select SELECT,
and push the MENU SELECT switch toward
ENTER.
The PAGE SELECT screen appears.
5
Select a menu page to be set, following the
procedure below.
To select from among menu pages 1 through 10
Turn the MENU SELECT knob to select a menu
page to be set, then push the MENU SELECT
switch toward ENTER.
To select pages 11 and after
1 Turn the MENU SELECT knob to move the
arrow marker (c) to the figure at the top of the
screen, then push the MENU SELECT switch
toward ENTER.
The arrow marker (c) changes to a question
mark (?).
2 Turn the MENU SELECT knob until the
desired menu page appears, then push the
MENU SELECT switch toward ENTER.
The a question mark (?) changes back to an
arrow marker (c).
23(E)