Unpacking And Installation; A Word On Copier Installation; Checking Packed Components And Accessories - Sharp AR-121E Service Manual

AL-1000/1010

[5] UNPACKING AND INSTALLATION

1. A WORD ON COPIER INSTALLATION

Improper installation may damage the copier. Please note the
following during initial installation and whenever the copier is
moved.
Do not install your copier in areas that are:
damp, humid, or very dusty
exposed to direct sunlight
poorly ventilated
subject to extreme temperature or humidity changes, e.g.,
near an air conditioner or heater.
Be sure to allow the required space around the machine for
servicing and proper ventilation.
8"(20cm)
4"
(10cm)
2. CHECKING PACKED COMPONENTS AND
ACCESSORIES
Open the carton and check if the following components and ac-
cessories are included.
Operation manual
Copier
5-1
8"(20cm)
4"
(10cm)
Power cord
TD cartridge
Drum cartridge
(installed in copier)