Samsung OfficeServ 500 Programming Manual page 434

CHAPTER 2. Ошибка! Стиль не определен.
4) Set the items below at the WLAN menu.
SYSTEM ID: Use the Soft button to move the
cursor Enter the new WLAN SYSTEM ID to
register.
Press Soft button and proceed to next register status.
Register the SYSTEM KEY.
Register the DNS server(first) IP.
Register the DNS server(second) IP.
Register the 2
Select the voice codec. Select from the G711a,
G711u, and G729 CODEC.
Numbers are given from 1 to 4 based on priority.
Select the usable RF channel. Maximum 6 channels
can be used for a system.
(Default RF channel: 1, 6, 11)
Used to change the TX POWER of all WBS.
(Default: LEVEL 1~4)
Used to clear registration information of all WBS.
5) Set the items below at the WBS24 menu The selected
WBS is according to the MMC 849 SELECT AP
TYPE(CWBS: COMBO WBS, BWBS: BASIC
WBS).
Register the WBS24 IP ADDRESS.
Register the WBS24 NET MASK.
2-392
nd
WBS IP.
WLAN: SYSTEM ID
WBS24
WLAN: SYSTEM KEY
00000
WLAN: 1ST DNS IP
0. 0. 0. 0
WLAN: 2ND DNS IP
0. 0. 0. 0
WLAN: 2ND WBS IP
0. 0. 0. 0
WLAN: CODEC LIST
CODEC 1: G.711a
WLAN: RF CHANNEL
USE CH 1: 01
WLAN: WBS TX PWR
DEFAULT
WLAN: CLR WBSREG
ARE YOU SURE?NO
CWBS1: IP ADDR
0. 0. 0. 0
CWBS1: NET MASK
255.255.255. 0
© SAMSUNG Electronics Co., Ltd.