Advertisement
NOTE
When preparing the Activ360™ filter for the
first time use of your AquaStation™, there is no
need to action step 8 for filter reset; once the
filter is installed, the purifier will automatically
begin the filter life counter.
IMPORTANT
• A dirty filter may reduce the performance of
the water purifier.
• The filter is not washable.
• Use only the original Breville filter
specifically intended for use with the
AquaStation water purifiers.
• Filter replacement alert is set to 90 days or
approximately 200L of water, whichever
comes first, however, for higher-than-normal
consumption or poor water quality, more
frequent changing may be required. If you
need to change your filter before the filter
replacement alert activates at 90 days or
approximately 200L, press and hold the
START/STOP
button for 3 seconds to
reset the filter once you have changed the
filter cartridge.
• The purifier will beep once and the water
droplet LED light will stop flashing. The filter
reset has now been completed.
• Water quality varies considerably from one
area to the next and has an effect on the life
of the water filter cartridge. For optimum
performance, the filter change alert will
activate after 90 days.
12
NOTE
• No filter or an incorrectly fitted filter may
cause the water purifier to operate less
effectively and/or may cause damage to the
water purifier.
• The filter must be fitted in the filter holder
with the pull ring facing upwards.
• From time to time, small floating black
particles may escape from the filter into the
water. This is a natural carbon fibre which is
food grade safe and not harmful to health.
NOTE
For replacement water filters, visit Breville.com
or contact Breville Customer Service.
Advertisement
