Makita DC10WA Quick Start Manual page 3

Refer to the table for the charging time below.
Battery type Voltage (V)
BL7010 7.2
BL0715 7.2
BL1013 10.8
NOTE:
• The battery charger is for charging Makita battery cartridge.
Never use it for other purposes or for other manufacturer's
batteries.
• If charging light may flash in red color, battery condition is
as below and charging may not start.
– Battery cartridge from just-operated tool or battery
cartridge that has been left in a location exposed to direct
sunlight for a long time.
Number of cells
2
2
3
• If the charging light flashes alternately in green and red,
Capacity (Ah)
1.0
1.5
1.3
– Battery cartridge that has been left for a long time in a
location exposed to cold air.
Charging will begin after the battery cartridge temperature
reaches the degree at which charging is possible.
charging is not possible. The terminals on the charger or
battery cartridge are clogged with dust or the battery
cartridge is worn out or damaged.
Charging time (minutes)
30
35
50
3