How to Use the Washer Dryer (Continue)
5
Press the Start/Pause button
■
The washer dryer starts to detect laundry amout, before setting the wash time.
■
The wash time displayed on the remaining time indicator varies according to the conditions.
Page 16 : Control Panel and Display.
■
Once a program starts, settings cannot be changed except for the spin speed setting of
programs other than the Duvet/Spin/Tub Wash/Rinse & Spin/Wool(*)/Hot Tub Wash(*)/
Outdoor(*) programs.
* Download program for BD-D120XGV/BD-D100XGV.
Pausing a program.
Adding clothes part way
through a wash.
Terminating a program.
6
Program ends
■
The buzzer sounds when the program ends.
By pressing the Special Program button for 3 seconds, (After press Power On/Off button)
There is a reception sound and if you press and setting will be set. Setup until you get the
sound you want.
■
The washer dryer automatically switches itself off when the program ends.
28
Press the Start/Pause button. The washer dryer switches itself
off if it is not restarted within 1 hour. Switch the power on and the
program starts again from the beginning.
* During the drying process, if the temperature inside the drum is
high, it will not be possible to pause.
* If the power is turned off and the temperature inside the drum
is high the next time it is turned on, a cool down process
is performed to lower the temperature inside the drum by
automatically operating the fan for safety. It cannot be paused
during the cool down process.
*You can add fabric when the
Available before the water become high level and the temperature
up to 55°C
Press the Start/Pause button to pause the selected program.
The door lock is automatically released after about 5 seconds
when the water level and temperature are safe. You can then
open the door and add your clothes. Close the door and press
the Start/Pause button again to restart the program.
* Note: It is not recommended to add a large amount of clothes
as the washer dryer first measures the load size to determine
optimum operation.
Press the Start/Pause button, and press the Power On/Off button
to switch power off. Then press the Power On/Off button again
and select the Spin program to drain remaining water in the drum
and spin-dry the laundry.
symbol is shown on the display.