Names Of Each Part - Hitachi CP-X960WA Service Manual

3. Names of each part

Main unit
ZOOM button
Used to adjust the size of the image.
MUTE button
This button turns the sound on and
off. Press once to turn the sound off;
then press again to turn the sound
back on.
STANDBY / ON button
Press this button to turn the power
on and off. When turned off, the
projector enters standby status.
LAMP indicator
This lamp lights or blinks when the
lamp is off.
POWER indicator
This indicator lights or blinks during
standby and during operation.
Remote control
photoreceptor
Lens
Lens cap
• Use the remote control in front of the remote control photoreceptor at a distance
of about 5 m or less and an angle of 30 degrees to the left or right of the center.
ZOOM FOCUS
MUTE INPUT
MENU
STANDBY/ON
RESET
LAMP POWER TEMP
– 3 –
CP-X960WA
CP-X970W
FOCUS button
Used to adjust the focus of the image on
the screen.
INPUT button
Press this button to switch the input. The
input changes in the following sequence
each time this button is pressed.
RGB1 RGB2 VIDEO
MENU button
Displays the image menu.
RESET button
Used to reset the initial settings.
TEMP indicator
This indicator lights or blinks when the
internal temperature of the projector
rises and when the fan malfunctions.
Speaker
Speaker
Cooling fan
(exhaust side)
Handle
Cooling fan
(intake side)