Installation - Toshiba F-LSA20(W) PH Manual

INSTALLATION

INSTALLATION
Body Installation Body Installation
Loosen Nut1 (counterclockwise) to remove it from Pole.
Attach Pole to Base by inserting the Convex into Concave.
Tighten Nut1 (clockwise) to x Pole rmly on Base.
Loosen Knob.A (counterclockwise).
Tighten Knob.A (clockwise) rmly after inserting Pole.
Remove Spinner and Nut2 from Body.
Lock Rear Guard with Nut2 after attaching it to Body. (Refer to Fig. A)
Lock Blade with Spinner after attaching it to Body. (Refer to Fig. B)
Attach Front Guard to Rear Guard (Refer to Front Guard Installation)
<Bottom view>
Height Adjustment
Loosen Knob.B (counterclockwise).
Adjust the height by lifting up the body.
Tighten Knob.B (clockwise) to lock.
Front Guard Installation
Align the hook of Front Guard
with Rear Guard as shown
below.
6
Convex
Concave
Knob. B
Press guards sequentially until
clipping.
1
2
3
Knob.A
Knob.B
Pole
Base
Nut1
Fix the clip using screw after
locking.
1
2
3
Body
Guard Clip