Operating The Answering System - Sharp UX-CL 220 Operation Manual

Operating the Answering System

START/MEMORY
4
Press
The outgoing message can be up to 60 seconds long. While recording, the
display will show the time left to record.
5
When finished, replace the handset or press
To listen to the outgoing message
To listen to the outgoing message, follow Steps 1 and 2 of the above
procedure and then press
cannot be erased. If you need to change it, simply repeat the recording
procedure.
Operating the Answering System
Activating the answering system
To turn on the answering system so that callers can leave messages, press
RESOLUTION/
RECEPTION MODE until the arrow in the display points to TAD. (TAD stands for
"Telephone Answering Device".)
The outgoing message will play (you can stop playback by pressing
STOP
).
It will not be possible to set the reception mode to TAD if an outgoing
message has not been recorded.
44
and speak into the handset to record a message.
PLAY
. Note that the general outgoing message
RESOLUTION/
RECEPTION MODE
STOP
.
TEL FAX
TAD