Alignment And Adjustment; Location Of Adjustment Button Of Remote Control - Samsung VR8809 Service Manual

2. Alignment and Adjustment

2-1 Reference
1) X-Point (Tracking center) adjustment, "Head switching adjustment" and "NVRAM option setting" can be adjusted with remote control.
2) When replacing the Micom (IC601) and NVRAM (IC603 ; EEPROM) be sure to adjust the "Head switching adjustment" and
"NVRAM option setting".
3) When replacing the cylinder ass'y, be sure to adjust the "X-Point" and "Head switching adjustment".
4) Among Samsung VCR remote control used for adjustment as a accessory, only the remote control that has figures buttons (0 ~ 9) is
available for all adjustment regardless of chassis.
5) How to adjustment.
- Intermittently short-circuit the test point on Main PCB with pincets to set the adjustment mode.
- If the corresponding adjustment button is pressed, the adjustment is preformed automatically.
- If the adjustment is completed, be sure to turn the power off.

2-1-1 Location of adjustment button of remote control

X-Point (Tracking Center)
Adjustment
Head Switching Adjustment
NVRAM Option Setting
Remote Control for adjustment is not supplied as a Service Jig.
Samsung Electronics
All manuals and user guides at all-guides.com
POWER
SLOW
SHUTTLE
V-LOCK
CABLE/DSS
REPLAY F.ADV/SKIP
100
VOL
TV/VCR PREV.CH
ENTER
T
MENU
<This type of remote control can adjust.>
Fig. 2-1
EJECT
VCR
TV
CH/TRK
<This type of remote control can not adjust.>
2-1