Download Print this page
Bosch ultraclarity pro Quick Start Manual
Bosch ultraclarity pro Quick Start Manual

Bosch ultraclarity pro Quick Start Manual

Advertisement

Quick Links

en-us
Ice and water dispenser
The following may be dispensed as necessary:
cooled water
crushed ice
ice cubes
WARNING
:
Risk of injury from broken glass!
Never use fragile glassware to catch ice when
dispensed.
WARNING
:
Risk of injury from rotating crusher blades!
Never reach into the ice cube dispenser opening.
NOTICE
Risk of damage to the appliance!
Do not place bottles or food in the ice cube container
in order to cool them quickly. The ice maker may
become blocked and damaged.
When switching on the appliance, note the
following
The ice and water dispenser only works when the
appliance is connected to the water supply.
After the appliance has been switched on, it will take
24 hours before the first batch of ice cubes are ready.
When the appliance is connected, air bubbles will still
be in the lines.
Extract the drinking water and discard until water can
be dispensed without bubbles. Draw drinking water for
at least 5 minutes and pour away.
When using the ice maker for the first time, discard the
first 30 to 40 ice cubes. Do not use ice cubes for
hygienic reasons.
Operating the ice maker
Once the freezer compartment has reached its freezing
temperature, water flows into the ice maker and freezes
into ice cubes. The ice cubes are automatically
discharged into the ice cube container when they are
ready.
After the appliance is first switched on, it takes roughly
24 hours for the first portion of ice cubes to be
produced.
The sides of the ice cubes may occasionally stick
together. They usually break away from each other as
they move to the dispenser opening.
20
Ice making switches off automatically when the ice
cube container is full.
The ice maker can make approximately 140 ice cubes
within 24 hours when ice cubes are discharged several
times during the day.
As the ice cubes are being made, the sound of the
buzzing water valve, the water flowing into the ice
storage bin and the falling ice cubes can be heard.
Drinking water quality
CAUTION
:
The water filter included with the appliance only
filters out particles from the supplied water and
does not filter out bacteria or microbes.
All materials used in the water dispenser are odorless
and tasteless.
If the water has an aftertaste, this may be caused by:
Mineral and chlorine content in the drinking water
Materials from which the domestic water line or
connection line are made
Freshness of the drinking water. If water has not
been dispensed for an extended period of time, the
water may have a "stale" taste. In this case,
dispense approx. 15 glasses of water and discard.
Note:
Rinse the water system that is connected to the water
inlet if no water has been dispensed in the last five
days.
The taste and smell of the water can be improved by
installing the included filter cartridge at the water intake
point.
We recommend that you regularly draw off a certain
amount of water from the water dispenser and do not
switch the appliance off. This will maintain the best
water quality.
Dispensing water
1. Press the "Water" button. The display panel shows
the "Water" symbol.

Advertisement

loading

Summary of Contents for Bosch ultraclarity pro

  • Page 1 en-us Ice making switches off automatically when the ice Ice and water dispenser cube container is full. The ice maker can make approximately 140 ice cubes The following may be dispensed as necessary: within 24 hours when ice cubes are discharged several times during the day.
  • Page 2: Dispensing Ice

    en-us 2. Press a glass or container against the dispenser 2. Press a suitable glass or container against the lever until the glass is filled with the desired amount dispenser lever until it is filled with the desired of water. amount of ice.
  • Page 3: Changing The Filter Cartridge

    en-us Important notes on the water filter 2. Pull out the ice-cube container. After use, the water system is slightly under ■ pressure. Take care when removing the filter cartridge. If the appliance has not been used for the last ■...
  • Page 4: Performance Data Sheet

    en-us 12.Press and hold the "Light/Filter" button for Note: 3 seconds. That resets the water filter indicator. The The filter cartridge must be tightened by hand so that symbol will then stop flashing. The new filter has no leaks are created and that the appliance is correctly now been activated.
  • Page 5: Operation Conditions

    en-us Substance Influent challenge Average reduction Reduction Max. permissible concentration product water requirement concentration Benzene 0.015 mg/L ± 10 % >96.8 % 0.005 mg/L Carbofuran 0.08 mg/L ± 10 % >98.8 % 0.04 mg/L p-Dichlorobenzene 0.225 mg/L ± 10 % >99.8 % 0.075 mg/L Lead pH = 6.5...

This manual is also suitable for:

11032518