Pptp; L2Tp - D-Link DWR-116 User Manual

Section 3 - Configuration
Choose this Internet connection if your ISP provides you PPTP
account.
Address Mode: Choose Static IP only if your ISP assigns you an
IP address. Otherwise, please choose Dynamic IP.
PPTP IP Address: Enter the information provided by your ISP.
(Only applicable for Static IP PPTP.)
PPTP Subnet Enter the information provided by your ISP.
Mask: (Only applicable for Static IP PPTP.)
PPTP Gateway Enter the information provided by your ISP.
IP Address: (Only applicable for Static IP PPTP.)
PPTP Server IP IP address of PPTP server.
Address:
Username: User/account name that your ISP provides to you for PPTP dial-up.
Password: Password that your ISP provides to you for PPTP dial-up.
Verify Password: Fill in with the same password in Password field.
Reconnect Choose Always-on when you want to establish PPTP connection all the time. If you choose Connect-on-demand, the device
Mode: will establish PPTP connection when local users want to surf the Internet, and disconnect if there is no traffic after the time
period set under Maximum Idle Time.
Maximum Idle The time of no activity to disconnect your PPTP session. Set it to zero or choose Always-on to disable this feature.
Time:
Click Save Settings to save your changes, or click Don't Save Settings to discard your changes.
D-Link DWR-116 User Manual

PPTP

Section 3 - Configuration
Choose this Internet connection if your ISP provides you L2TP
account.
Address Mode: Choose Static IP only if your ISP assigns you an
IP address. Otherwise, please choose Dynamic IP.
L2TP IP Address: Enter the information provided by your ISP.
(Only applicable for Static IP L2TP.)
L2TP Subnet Enter the information provided by your ISP.
Mask: (Only applicable for Static IP L2TP.)
L2TP Gateway IP Enter the information provided by your ISP.
Address: (Only applicable for Static IP L2TP.)
L2TP Server IP IP address of L2TP server.
Address:
Username: User/account name that your ISP provides to you for L2TP dial-up.
Password: Password that your ISP provides to you for L2TP dial-up.
Verify Password: Fill in with the same password in Password field.
Reconnect Choose Always-on when you want to establish L2TP connection all the time. Choose Connect-on-demand and the device will
Mode: establish L2TP connection when local users want to surf Internet, and disconnect if no traffic after time period of Maximum Idle
Time.
Maximum Idle The time of no activity to disconnect your L2TP session. Set it to zero or choose Always-on to disable this feature.
Time:
Click Save Settings to save your changes, or click Don't Save Settings to discard your changes.
19 D-Link DWR-116 User Manual

L2TP

20