Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for JB Systems SPYDER-RGB LASER
Summary of Contents for JB Systems SPYDER-RGB LASER
-
Page 3: Before Use
ENGLISH USER MANUAL OPERATION MANUAL ® Thank you for buying this JB Systems product. To take full advantage of all possibilities and for your own safety, please read these operating instructions very carefully before you start using this unit. FEATURES This unit is radio-interference suppressed. -
Page 4: Safety Instructions
• Due to safety reasons it is prohibited to make unauthorized modifications to the unit. Important: Never look directly into the light source! Don’t use the effect in the presence of persons suffering from epilepsy. JB SYSTEMS® 2/12 SPYDER-RGB LASER... -
Page 5: Laser Safety Instructions
This valuable document can be obtained from www.laserinstitute.org Please note that JB SYSTEMS cannot be made liable for damages caused by incorrect installations and unskilled operation! WARNING LABEL LOCATIONS A. - Page 6 11. SAFETY EYEBOLT: used to attach a safety cable when the unit is rigged (see paragraph “overhead rigging” 12. CONTROL PANEL: Used to select the different functions of the laser, see further to learn how to operate the unit. JB SYSTEMS® 4/12 SPYDER-RGB LASER...
-
Page 7: Overhead Rigging
HOW TO SET UP AND CONTROL THE UNIT MUSIC INPUT SENSITIVITY: The unit works to rhythm of the beat when used in standalone or master/slave mode To set the input sensitivity, follow these steps: JB SYSTEMS® 5/12 SPYDER-RGB LASER... - Page 8 3) SLAVE MODE: The laser follows the instructions given by the first SPYDER-RGB LASER (master) in the chain. • Connect the DMX input of the laser to the DMX output of the previous laser in the chain. • Press the FUNC-button until the display shows “SLA”...
- Page 9 DMX-CONFIGURATION OF THE LASER: IMPORTANT REMARK : The value of CH1 is used to put the laser in the desired DMX-mode. The SPYDER-RGB LASER has 3 DMX-modes : 6, 9 and 10 channels. 6CH-mode : Fader CH1 between 175 and 199...
- Page 10 0 -359 degree fixed X axis rolled X axis 128-191 Clockwise rolling Rolling 192-255 Anticlockwise rolling 000-127 0 -359 degree fixed Z axis rolled Z axis 128-191 Clockwise rolling Rolling 192-255 Anticlockwise rolling 000-127 128 different fixed position on X axis JB SYSTEMS® 8/12 SPYDER-RGB LASER...
- Page 11 128-191 Clockwise moving Y axis Anticlockwise moving 192-255 000-015 Color 1 016-031 Color 2 Color 3 032-047 Color 1+Color 2 048-063 Color Color 1+Color 3 064-079 Color 2+Color 3 080-095 Color 1+Color 2+Color 3 096-111 JB SYSTEMS® 9/12 SPYDER-RGB LASER...
- Page 12 • Press the “Func” button to choose the desired setting to be changed. • Press up or down until the laser shows the Y arrow axis on the top and X arrow axis on the right. • Then press “Enter” to confirm the selection JB SYSTEMS® 10/12 SPYDER-RGB LASER...
- Page 13 ENGLISH USER MANUAL Pattern list JB SYSTEMS® 11/12 SPYDER-RGB LASER...
-
Page 14: Maintenance
Laser Safety Standard: EN/IEC 60825-1:2014 Size: see picture below Weight: 2.35kg Every information is subject to change without prior notice You can download the latest version of this user manual on our website : www.jb-systems.eu JB SYSTEMS® 12/12 SPYDER-RGB LASER...