Operating The Hob; Before Using For The First Time; Touch Control-Sensor Fields; Switching On The Appliance - AEG 96901K Operating And Installation Instructions

Operating the hob

Before using for the first time

IMPORTANT!
Damage to the ceramic glass surface.
Aggressive, scouring cleaning agents may damage the ceramic glass surface.
Use only water and washing-up liquid.
1. Wash down the ceramic glass hob with hot water and washing-up liquid and rub dry
(with a tea towel).
.
IMPORTANT!
Damage to the ceramic glass surface.
Burnt-on stickers and film damage the ceramic glass surface.
Remove stickers and film.
2. Switch on the cooking zones briefly one after another to check them.
When used for the first time a slight odour may be detected briefly.

Touch Control-Sensor fields

In order to operate the Touch Control sensor fields place your finger from above onto the
required field until the corresponding display lights up or extinguishes, and/or the desired
function is carried out.
For faster setting keep your finger on the sensor field until the required value is attained.

Switching on the appliance

To switch on the appliance completely, touch the „ON/OFF" sensor field
12
.