Further Interfaces - AEG ID ARE H9 BLE Manual

1.7 Further Interfaces

The use and functions of the USB interface is supported by the ARE H9 BLE.
During the use of the USB interface the Bluetooth part of the reader is not deactivated, it will only
not be used for data transmissions. Therefor the ARE H9 BLE will be still shown as connect t the
paired device.
2 Microsoft Windows 7 Driver Installation
Because Bluetooth Low Energy is not supported on the operating system Microsoft Windows 7 of
the Microsoft drivers, it is necessary to install a suitable driver for the Bluetooth device you are
using which provides the support of Bluetooth Low Energy.
2.1 Broadcom BCM20702
Suitable and tested Bluetooth devices for Microsoft Windows 7 are for example devices
(intern/Dongle) using the Broadcom BCM20702 chipset (for example LM Technologies LM506).
Partial devices with this chipset are supplied with no more current drivers, which could cause that
the ARE H9 is detected but no pairing or keyboard function is available. For this case at the
customer CD for the ARE H9 BLE will provide an actual driver with the version v6.5.1.5800.
Please remove any previous version of Bluetooth software existing in your system before you start
to install the WIDCOMM drivers on the customer CD.
The remove procedures are as follows:
Step 1: Click Start/Settings, then select Control Panel.
Step 2: In the Control Panel window, double click Add/Remove programs icon.
Step 3: Find out the WIDCOMM or other Bluetooth Software then remove it.
--------------------------------------------------------------------------13/17------------------------------------------------------------------------------------