Page 1
DS-KAB6-D1 Bracket Installation Guide Hikvision Product Support Team DS-KAB6-D1 Bracket Installation Guide The bracket is suitable for DS-K1T671 series (including temperature screening series), DS-K1T672 series, DS-K1T680 series, DS-K1TA70 series, DS-K1T341 series. 1. Prepare in advance a. Prepare screw driver set (not included in the package) b.
Page 2
DS-KAB6-D1 Bracket Installation Guide Hikvision Product Support Team 3. Select correct connector according to device model. here we take DS-K1T672 for example. 4. Link the connector between backet and device, connect network cable.
Page 3
DS-KAB6-D1 Bracket Installation Guide Hikvision Product Support Team 5. Install device to the back plate. 6. Connect power and 12V network cable to the bracket, device will power on.
Page 4
DS-KAB6-D1 Bracket Installation Guide Hikvision Product Support Team FAQ: How to tighten the bracket when the shaft is loose 1. Prepare hex wrench and needle (not included in the package)), find the hole on the bracket, gently pry open the side cover with the needle.