Canon BESTEM-D01R Manual page 7

Preface
■Interlocks
A cover switch is installed on the machine major unit covers. When a cover equipped with a cover
switch has opened when the machine is running, the interlock operates to automatically stop the
machine. Be sure not to open any cover during automatic running.
Some of the machine covers are not equipped with a cover switch. For safety, keep all the covers
closed during machine running.
To remove a cover to maintain the unit, preliminarily switch off the machine main power supply.
■Signal Tower
●A signal tower is installed for informing you about the current system status.
The Red lamp lights up together with an alarm, when a trouble has occurred during automatic
operation.
The Yellow lamp goes on when the operator has been called for work supply or other purposes.
The Green lamp lighting shows auto-operation.
■Other cautions １
■ Other cautions ２
Do not fail to perform the daily and the periodical
check and confirm that there are no failures or
abnormalities in the system before starting the
work.
When repairing or overhauling the system, do
the work in safety by taking care of the wiring
between the units and watch where you step.
When an abnormality has been detected before or
during the system operation, immediately inform
the personnel of responsibility at site and personnel
in charge of safety and the health management.
ｉ
ｉ
3