Controlling Audio; Way Speaker System Setup - Kenwood DMX8018S Instruction Manual

Controlling Audio

Controlling Audio
NOTICE
• Each operation in this section can be started from
the multi function menu.
You can adjust the various settings such as
audio balance or subwoofer level.
1
Press the [MENU] button.
h Popup menu appears. h
2
Touch [Audio].
See the following section for each
setting.
• Set up speaker/ X'over (P.47)
• Controlling equalizer (P.49)
• Set listening position/ DTA (P.52)
• Controlling general audio (Fader /
Balance) (P.49)
• Set volume offset (P.50)
• Performing zone control (P.51)
• Set sound effect (P.51)
46

3 way speaker system setup

Select the appropriate crossover network
mode according to the speaker system (2-way
speaker system or 3-way speaker system).
1
Press the [HOME] button.
h HOME screen appears. h
2
Touch [
].
h Source selection screen appears.
h
3
Touch [STANDBY].
4
Press the [S (1)] button and the [CAM]
(2) button for 1 second at the same time.
1
h Speaker system select screen appears.
h
5
Select the crossover network mode.
h A confirmation screen appears.
h
6
Touch [Yes].
NOTE
• When the 3-way speaker system is selected, the
following functions are disabled.
– Zone Control
– Fader of Controlling General Audio
– Front focus of Listening Position/ DTA
– Select the speakers to output the sound from
cell-phone of Blutooth HF/Audio
– Beep of User Interface Setup
• Connecting 3-way speakers with the 2-way mode
selected can break the speakers.
2