Table of Contents
Advertisement
2
Set the following items.
In the table below, the default setting is indicated by an
asterisk (*).
Item
LUT
COLOR SPACE
PRE LUT RANGE
POST LUT
RANGE
Outputting Tele-File Information
The information (clip list) stored on the Tele-File label of
the cassette tape can be loaded and its contents can be
confirmed. Then, the clip list can be output as a selected
type of EDL file after sorting out the necessary clips.
Note
The Tele-File label is not attached to the standard
HDCAM cassette tape that can be used with MXF format.
When the Tele-File label is not attached to the cassette
tape, this function is not operable.
34
Controlling the On-board Functions
Function/settings
Select one of the eight banks.
*
Off
: No LUT is used.
BANK1 to BANK8: The LUT in the
specified bank is applied to
the monitor output.
Specifies the monitor output
signal type.
*
RGB
: RGB 4:4:4 signal
YCbCr: YcbCr 4:2:2 signal
Specifies whether to change the
Head to Full before the LUT.
on: Extends the effective signal
range of a monitor output
signal with headroom to full
range before the LUT.
*
off
: Does not extend the effective
range of the signal before the
LUT.
Specifies whether to change the
Full to Head after the LUT.
on: Compresses a full range
monitor output signal to the
effective signal range of a
monitor output signal with
headroom after the LUT.
*
off
: Does not compress a full
range monitor output signal
after the LUT.
1
Access the VTR from the web client to display the web
application, click the VTR SETUP menu select button,
and then click the CASSETTE tab.
The CASSETTE tag display appears.
2
Perform either of the following to specify the clip list
to be loaded.
To load the clip list stored in the CSV file
format
Click the Browse... button at the right of the CSV
FILE box to and select the clip list that is read from the
SRW-5800, SRW-1, or SRW-9000 as a CSV file and
stored on the disk of the client machine or the
removable media. Then, click the LOAD button to
display the selected clip list.
To load the clip list from the cassette tape
currently inserted in the SWR-5800
Click the UPDATE button at the right of the
CASSETTE box. Then, the clip list from the cassette
tape is displayed.
3
On the clip list, click to select the line that you want to
output.
The selected clip is highlighted. To deselect the clip,
click it again.
To select all the clips on the clip list
Double-click anywhere on the list while holding down
the Shift key on the keyboard.
To deselect all the clips
Double-click anywhere on the list while holding down
the Ctrl key or the Alt key on the keyboard.
Advertisement
Table of Contents
