Cisco Valet Connector AM10 User Manual page 5

6. A list of available wireless networks appears. Select
yournetwork.ClickNext.
ConnecttoaWirelessNetwork
7. If your network does not use wireless security, go to
step9.
If your network uses wireless security, enter the
wirelesspasswordforyourtypeofsecurity:
WiredEquivalentPrivacy(WEP):EntertheWEPkey.
 •
Wi-FiProtectedAccess(WPA/WPA2):Enterthe
 •
passphrase(alsoknownasapre-sharedkey).
ClickNext.Gotostep9.
EntertheWirelessPassword
8. Followtheon-screenpromptstouseyourEasySetup
Key.ClickNext.
InsertyourEasySetupKey
9. Theinstallationiscomplete.ClickClose.
YouareNowConnectedtoYourWirelessNetwork
NOTE: If you have any problems during the
installation process, refer to the Frequently
AskedQuestionsinthesetupsoftware,orusea
computerwithanactiveInternetconnectionto
visitwww.ciscovalet.com/support.
Chapter2:Installation
3