Connecting To An External Monitor - Canon X600 User Manual

Connecting to an External Monitor

You can display an image from the projec-
tor to an external monitor.
VGA cable
To monitor output terminal
(mini D-sub 15-pin terminal)
Commercial VGA cable
Image input terminal
(mini D-sub 15-pin terminal)
You can connect one external monitor.
The multi-monitor display is not sup-
ported.
The projected image is displayed on
the external monitor.
You cannot output the input signal to
the external monitor if it is DIGITAL
PC.
34
Connecting to Audio Terminals
Connect an audio cable between the pro-
jector and computer if you want to use the
projectors speaker.
Projector
External monitor
Audio cable
AUDIO OUT terminal
Commercial Audio cable
AUDIO IN terminal
Use an audio cable without a built-in
resistor. Using an audio cable with a
built-in resistor turns down the sound.
The built-in speaker is monaural.
The speaker plays the sound from the
equipment which the audio cable is
connected to regardless of the image
input signal.
Computer
Projector