Table of Contents
Advertisement
SETTING UP THE VCR
EnergySaver
By default, this VCR automatically turns off after two hours of
inactivity. Press 4 to change the time delay, or to disable the
feature.
•
OFF: The VCR will remain turned on until you shut it off.
•
1:00, 2:00, or 3:00: The VCR turns off after one, two, or three
hours of inactivity.
Thirty seconds before shutting off, the VCR will warn you with a
screen reading, "The VCR will turn off in 30 seconds. Press any
key to cancel."
If you use the VCR's tuner instead of your TV to tune channels,
you may want to turn this feature off.
Front Panel Brightness (VCR Display)
You can change the brightness level of the fluorescent display
panel on the front of the VCR. Press 5 to switch between the
options.
•
AUTO brightens the display when the VCR is on and dims
the display when the VCR is off.
•
BRIGHT keeps the display bright.
•
DIM keeps the display at a low brightness level.
18
PREFERENCES
1 Remote Control:
VCR1
2 Auto Play:
ON
3 Auto TV/VCR:
ON
4 EnergySaver:
2:00
5 Front Panel:
AUTO
0 Exit
The PREFERENCES menu allows
you to access settings for your
remote control, EnergySaver, front
panel brightness, and more.
Advertisement
Table of Contents
