Advertisement
Installation
Note: When installing the TVC-BIR-MR or
TVC-BIR-HR, please use the optional bracket,
TVC-BIR-WM, which is sold separately.
To install the camera, do the following.
1.
Using the mount as a template, place
it level against the mounting surface
and mark the position of the
mounting holes.
2.
Following all local codes, drill and
prepare the mounting holes.
3.
Securely fasten the mount to the
mounting surface with the appro-
priate fasteners.
4.
If needed, seal all mounting holes so
that no moisture can leak into the
mounting surface.
4
Hide quick links:
Advertisement
