Honeywell AIR GENIUS Owner's Manual page 5

CONTROL PANEL (ALL MODELS)
Tips for Using your new Air Purifier
Max Cleaning
Setting
General Cleaning
Setting
Sleep/Quiet
Setting
Check Filter Button
and Indicator
Cleaning Level Button – Once you have pressed the Power Button, use the Cleaning Level Button
( ) to select the desired air cleaning level. Your air purifier will start on the General Cleaning setting each
time you turn the air purifier on. Continue to press the (
the desired setting. The following is a reference to help get the most out of your air purifier's performance:
LEVEL 3 - MAX
Best for power cleaning the air when unpleasant odors are noticeable, your room is particularly dusty,
or you can sense that airborne particles are present. This setting provides the fastest air cleaning of all
the settings and circulates the air frequently in the room.
LEVEL 2 - GENERAL
Best for General Cleaning. Use this setting to help reduce airborne dust and smoke particles, like those from
cooking or tobacco smoke.
LEVEL 1 - SLEEP
Best for ultra quiet operation, perfect for nighttime use when sleeping.
Oscillate Button – To help circulate fresher, cleaner air through the room, this unit has an oscillation feature.
To turn Oscillation on, simply press the Oscillation button (
in Oscillation mode. To turn Oscillation off, press the button again.
Check Filters Button – When it is time to check and clean the filters, the indicator light will illuminate. When this
light comes on, you will need to clean the Permanent, Washable ifD® Filter and clean or replace the Pre-Filter.
(See Filter Cleaning instructions on pages 9-10). It is recommended that you periodically check the filters.
Depending on operating conditions, the filters should be cleaned every 3 months. If you have chosen
to use the Odor & VOC Reducing
After you have cleaned or replaced the filters, you will need to RESET the Electronic Filter Check.
HFD300 Series
Power Button
Pre-Filter, it is NOT washable and should be replaced after 3 months.
K
5
Cleaning Level
) button to cycle through cleaning levels to reach
) once. The LED indicator will illuminate when
Oscillation Button
Button