Download Print this page
Panasonic ATTUNE 457 Cheat Sheet

Panasonic ATTUNE 457 Cheat Sheet

Advertisement

Quick Links

Troubleshooting
The power indicator blinks red.
-The ID of this product is not yet registered
in the Center Module and a wireless connection
cannot be made. Register ID in the Center
Module of the target.
The power indicator lights red.
-The battery is almost exhausted. Replace the
battery with a charged one.
Cannot turn on the headset.
-The battery is exhausted. Replace the battery
with a charged one.
-The battery is not inserted correctly. Position
the battery properly.
Cannot communicate with another headset or
the customer at the order post.
-The Center Module may be turned off. Turn on
the power switch of the Center
Module. If no remedy exists, consult your
dealer for repairs.
-The headset ID is not registered in the
Center Module of the target. Register ID in the
Center Module of the target.
-The [S] +[P] or [S] + [T] buttons may have
been pressed at the same time, causing the
extended functions to start. Turn the power off
and then back on.
Cannot hear or talk to the speak post, but
communications with other headsets are OK.
-The vehicle detector may be malfunctioning
because the detector is not plugged into the
Center Module, no power is supplied, or the
detecting function is out of order. Check that the
vehicle detector is plugged in and has power. If
no remedy exists, consult your dealer for repairs.
Cannot "talk" or "page" in certain areas.
-Radio waves cannot reach the area Remove any
metal obstacles blocking radio waves.
Charging
Use the supplied charging attachment to
charge the battery with the battery charger.
The charging time is approximately 3 hours
(when charged from empty to full). For
details on the indicator during charging,
refer to the operating instructions for the
battery charger.
When the charging attachment (accessory)
is attached to the battery charger as shown
in
the figure below, insert the battery while
matching the terminals
.
Included Accessories
PUGX1005ZA- Color tips – Black
PUGX1005ZB- Color Tip – Red
PUGX1005ZC- Color Tip – Blue
PUGX1005ZD- Color Tip – Green
PUGX1005ZE- Color Tip – Yellow
2FA1CH455P- Charging attachment
Optional Accessories
WX-SB100 - Battery
(Li-ion 3.7 V DC, 700 mAh)
WX-Z3040A - Battery Charger
Consumables
PGHG1521ZAC1- Head Pad
PUHG1019ZA- Ear Pad
PUHS1009ZA – Ear Foam
PUHS1007ZA - MIC Filter
PUKV1026ZA - MIC Filter Cover
Foam and filters are recommended to be
regularly replaced with new ones.
PANASONIC
ATTUNE
"457"
HEADSET
CHEAT SHEET
Please see the Operator Instruction
Guide for more information.
09/30/2021 r1.0

Advertisement

loading

Summary of Contents for Panasonic ATTUNE 457

  • Page 1 -The headset ID is not registered in the Center Module of the target. Register ID in the PANASONIC Center Module of the target. -The [S] +[P] or [S] + [T] buttons may have been pressed at the same time, causing the ATTUNE extended functions to start.
  • Page 2 Headset registration Talk Button Functions: 1) Set the Center Module to “ID Registration” mode. Modes: Refer to the operating instructions of the Center Push to Talk: Ear Pad Module. • Click and hold to talk. 2) Rotate the microphone boom to turn off the power of •...