GE Profile JGP970 Owner's Manual page 10

Cleaning the glass cooktop surface.
Clean your cooktop after
each spill. Use CERAMA
BRYTE Ceramic Cooktop
®
Cleaner.
Use a CERAMA BRYTE Cleaning
®
Pad for Ceramic Cooktops.
The CERAMA BRYTE Ceramic
®
Cooktop Scraper and all
recommended supplies are
available through our Parts Center.
See instructions under "To Order
Parts" section on next page.
NOTE: Do not use a dull or
nicked blade.
10
Normal Daily Use Cleaning
ONLY use CERAMA BRYTE
®
Cleaner on the glass cooktop. Other creams
may not be as effective.
To maintain and protect the surface of your
glass cooktop, follow these steps:
Before using the cooktop for the first time,
remove the burner grates and clean the
cooktop with CERAMA BRYTE
Cooktop Cleaner. This helps protect the
top and makes cleanup easier.
Daily use of CERAMA BRYTE
Cooktop Cleaner will help keep the
cooktop looking new.
Burned-On Residue
WARNING:
glass surface may occur if you use scrub
pads other than those recommended.
Allow the cooktop to cool.
Remove the burner grates and spread a
few drops of CERAMA BRYTE
Cooktop Cleaner on the entire burned
residue area.
Using the included CERAMA BRYTE
Cleaning Pad for Ceramic Cooktops, rub
the residue area, applying pressure as
needed.
Heavy, Burned-On Residue
Allow the cooktop to cool.
Remove the burner grates. Use a single-
edge razor blade scraper at
approximately a 45° angle against the
glass surface and scrape the soil. It will
be necessary to apply pressure to the
razor scraper in order to remove the
residue.
After scraping with the razor scraper,
spread a few drops of CERAMA BRYTE
Ceramic Cooktop Cleaner on the entire
burned residue area. Use the CERAMA
BRYTE Cleaning Pad to remove any
®
remaining residue.
(on some models)
Ceramic Cooktop
Ceramic
®
NOTE: It is very important that you DO NOT
heat the cooktop until it has been cleaned
Ceramic
®
thoroughly.
DAMAGE to your
Ceramic
®
®
®
Shake the cleaning cream well. Apply a
few drops of CERAMA BRYTE
Cooktop Cleaner directly to the cooktop.
Use a paper towel or CERAMA BRYTE
Cleaning Pad for Ceramic Cooktops to
clean the entire cooktop surface.
Use a dry cloth or paper towel to
remove all cleaning residue. No need to
rinse.
If any residue remains, repeat the steps
listed above as needed.
For additional protection, after all
residue has been removed, polish the
entire surface with CERAMA BRYTE
Ceramic Cooktop Cleaner and a paper
towel.
For additional protection, after all
residue has been removed, polish the
entire surface with CERAMA BRYTE
Ceramic Cooktop Cleaner and a paper
towel.
Ceramic
®
®
®
®