Settings Mode; Switching The Sensor Tones On/Off - Miele K 14827 SD Operating And Installation Instructions

Switching on and off

Settings mode

Certain settings on the appliance can
only be selected in the settings mode.
How to select the settings mode and
how to change the settings is
described in the relevant section of
these instructions.
Overview of functions that can be
selected in the settings mode:
To enter or leave the settings
mode
To switch the sensor tones
on/off
(see "Switching on and off")
To confirm that the active
charcoal filters have been
changed (see "Active charcoal
filters")
To switch the safety lock on/off
(see "Switching on and off")
To change the brightness of
the temperature display
(see "The correct temperature")
To adjust the temperature in
the PerfectFresh zone
(see "The correct temperature")
The door alarm is automatically
disabled when the appliance is in
the settings mode. As soon as the
door is closed, the door alarm is
activated again.
14

Switching the sensor tones on/off

The sensor tone which sounds each
time a sensor is touched can be
deactivated.
^ Touch and leave your finger on the X
sensor.
c
^ At the same time, briefly touch the
On/Off sensor (without letting go of
b
the X sensor).
^ Leave your finger on the X sensor for
another 5 seconds until c appears in
^
the display.
^ Touch the X sensor repeatedly until b
appears in the display.
u
^ Touch the On/Off sensor again.
^ By touching the X sensor, you can
now select whether the sensor tones
d
are switched on or off:
b 0: Sensor tones are switched off
b 1: Sensor tones are switched on
b –: Return to menu.
§
The old setting lights up, and your
newly selected setting flashes.
^ Touch the On/Off sensor to confirm a
new setting.
^ Touch the X sensor repeatedly until c
appears in the display.
^ Touch the On/Off sensor.
You have now left the settings mode.