Cable Management; Fan Assembly - U-Line Deluxe H-6851 Assembly Instructions Manual

CABLE MANAGEMENT

1. To remove covers, use a Phillips head screwdriver
to unscrew the two screws securing covers to the
monitor arm. This allows user to slide cables through
covers. Once complete, re-secure the covers to the
monitor arm using the Phillips head screws.
(See Figure 39)
Take off covers and put cable in.
Figure 39

FAN ASSEMBLY

NOTE: Fan comes with 6" and 10" long bracket.
Choose desired bracket based on application.
1. Slot 6" or 10" fan mounting bracket between opening
in fan upright mounting bracket. Align holes of each
bracket and attach using two M6 x 12 mm hex bolts
and two M6 flange nuts. (See Figure 40)
Figure 40
Upright Mounting
Fan Mounting Bracket
PAGE 12 OF 38
OPTIONAL ACCESSORIES CONTINUED
Insert screw to lock covers.
Bracket
2. Align hole on the opposite end of fan mounting
bracket to the hole on the crescent fan bracket.
Attach using M12 x 20 mm hex bolt, M12 washer,
M12 lock washer and M12 hex nut. (See Figure 41)
Figure 41
3. Align fan assembly with uprights at desired height.
4. Secure to uprights with two M6 x 40 mm hex bolts
and two M6 flange nuts. (See Figure 42)
Figure 42
1-800-295-5510
uline.com
1021 IH-5759