Changing The Usb Connection Setting (Usb Bus Powered) - Sony Walkman NWD-E023F Operation Manual



Settings
Changing the USB Connection Setting
(USB Bus Powered)
Depending on how you are using the computer, if the power supply (USB Bus
Power) is insufficient, incomplete data transfer may occur from the computer
to the player. In this case, setting the USB connection (USB Bus Powered) to
"Low-Power 100mA" may improve data transfer.
Note
 You cannot set this during USB connection.

Press and hold the

Press the / button to select
the  button to confirm.

Press the / button to select "Advanced Settings>," and then
press the  button to confirm.

Press the / button to select "USB Bus Powered>," and then
press the  button to confirm.

Press the / button to select the setting, and then press the
 button to confirm.
"High-Power 500mA": Sets the power rating from computer to 500mA.

(Default setting)
"Low-Power 100mA": Sets the power rating from computer to 100mA.

To return to the previous menu
Press the

Hints
 When you connect the player to a laptop computer, we recommend to connect the
laptop computer to AC power.
 The charging time will be longer if the "USB Bus Powered" is set to "Low-Power 100mA. "
/HOME button
/HOME button until the HOME menu appears.
/HOME button.
 button
/ button
(Settings), and then press