Playing A Cd - Sony CDP-XE900E Operating Instructions Manual

Basic Operations

Playing a CD

See pages 4 – 5 for the hookup
information.
If you turn on the player with
a CD in the tray
You can start playing
automatically from the
beginning of the CD. If you
connect a commercially
available timer, you can start
playing the CD at any time
you want.
You can adjust the output
level to the amplifier
Press LINE OUT LEVEL +/–
on the remote. You can
reduce the output level up to
–20 dB.
When you reduce the output
level, appears in the
FADE
display.
When you turn off the
player, the output level
automatically returns to the
maximum level.
Note
If you press the LINE OUT
LEVEL +/– buttons on the
remote while recording, the
recording level will change
even when it is preset on the
tape deck, etc.
Note
If you push the disc tray in while
the power is off, the disc tray
opens and closes automatically
when you turn on the player
again.
6 EN
2
POWER
PLAY REPERT FADER TIME
MODE
EDIT/ PEAK AUTO MUSIC
TIME FADE SEARCH SPACE SCAN
1
2
3
4
To stop playback
Press p.
To
Pause
Resume play after pause
Go to the next track
Go back to the preceding track
Stop play and remove the CD
3 4
OPEN/CLOSE
Turn on the amplifier and select the CD player position so that
you can listen to the sound from this player.
Press POWER to turn on the player.
Press § OPEN/CLOSE, and place a disc on the disc tray.
With the label side up
P r e s s · .
The disc tray closes and the player plays all the tracks once
(Continuous Play).
Adjust the volume on the amplifier.
AMS
CHECK CLEAR ENTER
You need to
Press P
Press P or ·
Turn AMS ± clockwise
T u r n A M S ±
counterclockwise
Press § OPEN/CLOSE