6 ] Removing The Power Pcb Assy - Brother P-touch PT-2730 Service Manual

[ 6 ] Removing the Power PCB ASSY

CAUTION: When handling the PCBs, put on the grounding wrist band. Failure to do
so might break LSIs and other electronic devices.
(1) Disconnect the two connectors of the power PCB ASSY from the main PCB
ASSY.
(2) Remove the screw, and remove the power PCB ASSY from the upper cover.
Power PCB ASSY
Upper cover
Screw
Figure 3.1-20 Removing the Power PCB ASSY
III - 16
Power PCB ASSY
connectors
Main PCB ASSY