Isdn Terminal Data Programming; Ilc Assignment - NEC Neax 2000 IVS2 Manual

ISDN TERMINAL DATA PROGRAMMING

ILC Assignment

START
Assign an ISDN line station number to the
CM10
required LEN.
Assign a Tenant number to each ISDN line
CM12
station number.
Assign a Trunk Restriction Class to each
ISDN line station number.
Assign an ISDN Indial number to the
required ISDN line station number.
Assign a Local Office Code Table number
to the required ISDN line station number.
A
2
NEAX2000 IVS ISDN System Manual
ND-70919 (E), Issue 1.0
DESCRIPTION
CHAPTER 3 SYSTEM DATA PROGRAMMING
ISDN Terminal Data Programming
(1) 000-763: LEN
(2) EFX-EFXXXXXXXX: ISDN Line Station
YY=04
•
(1) X-XXXXXXXX: ISDN Line Station No.
(2) 00-63: Tenant No.
If no data is set, the default data is 01.
• YY=01
(1) X-XXXXXXXX: ISDN Line Station No.
(2) X Z: Trunk Restriction Class
X: 1 -8: Trunk Restriction Class in Day
Mode
Z: 1 -8: Trunk Restriction Class in
Night Mode
1: Unrestricted (RCA)
2: Non-Restricted 1 (RCB)
3: Non-Restricted 2 (RCC)
4: Semi-Restricted 1 (RCD)
5: Semi-Restricted 2 (RCE)
6: Restricted 1 (RCF)
7: Restricted 2 (RCG)
8: Fully-Restricted (RCH)
YY=12
•
(1) X-XXXXXXXX: ISDN Line Station No.
(2) X-XXXX: ISDN Indial No.
• YY=13
(1) X-XXXXXXXX: ISDN Line Station No.
(2) 00-14: ISDN Local Office Code Table
No. 00-14
DATA
No.
Page 101