Sony TC-TX1 Operating Instructions Manual page 5

FM lead aerial (supplied)
Right speaker
SA-N1**
STEP 2
Mains lead
Speaker cable (supplied) Mains lead
* For only the customers using the TC-TX1 stereo cassette deck
**The rear view of the SA-N11 differs from the illustration.
STEP 4 Connecting the
Aerials
FM lead aerial* (supplied)
AM loop aerial**
(supplied)
* Fix it to the place for optimum reception.
** Orient it toward the direction for optimum
reception.
To improve the reception
Connect an external aerial (p.19).
To set up the AM loop aerial
Tuner CD player
Stereo cassette deck
STEP 4
Audio cord (supplied) Flat cord* (supplied)
STEP 5 Connecting the
Power
Connect the mains lead of the tuner CD
player to the wall outlet after you have
made all the above connections.
Notes
• You can remove the front net from the
speaker.
• The AU BUS (audio bus) connector on the
rear panel of the tuner CD player is used to
connect the optional Sony MDS-MX1
MiniDisc deck. See the instruction manual
for MDS-MX1 in detail.
AM loop aerial (supplied)
STEP 3
STEP 1
STEP 5
to the wall outlet
! Do this connection last !
Left speaker
GB
5
Chapter 1: Setting up