Confirming Power Supply To The Media Receiver And Plasma Display; Basic Remote Control Operation - Pioneer PDP-5040HD Basic Operation And Troubleshooting

Basic Operation
Using these instructions is convenient until you become accustomed to operating the units.
For more details refer to the Operating Instructions.

Confirming power supply to the Media Receiver and Plasma Display

Confirm that the Media Receiver and Plasma Display STANDBY indicators are lit red.
If they are not lit, press the Media Receiver and Plasma Display POWER buttons.
Media Receiver
STANDBY Indicator
POWER Button
* If the STANDBY indicators do not light even after pressing the POWER buttons, please refer to P.5.

Basic remote control operation

Operate the remote control while pointing it towards the Plasma Display's remote control sensor.
4
All manuals and user guides at all-guides.com
STANDBY Indicator
POWER Button
* Press the button with the same number and color on the
remote control.
1 4
1
*
Watching conventional TV channels
2
-1
2
-1
2
-1
2
-2
2
-1
Watching digital TV channels
2
-1
2
-1
2
-2
3
Watching DVD and VCR images
*
2
-2
2 3
-2
4
Plasma Display
Switch power on.
Press the ANT button, and select ANTENNA.
Input the number of the desired channel, or select the
desired channel with the CH +/- button.
Press the DTV button.
Input the number of the desired channel, or select the
desired channel with the CH +/- button.
Press the INPUT button.
Adjust volume level.
Switch power off.
* If you switch power to the unit off, press the Plasma
Display's POWER button.
Remote Control Sensor