Installation - Honeywell Notifier LCD6000N Installation Manual

INSTALLATION

Dimensions for wall-mount
It is recommended to not install the LCD6000N control panel close to heat sources (radiators, heaters, etc..).
LCD6000N
LCD6000N_manu-inst
Plug-in the cable into CN1
Front panel fixing screws
Installation Manual
Doc. M-183.1-LCD6000N-ENG Rev A.2
The panel is designed to be wall-
mounted through 4 self-blocking nogs
(stone walls) or self-tapping screws (pre-
built panels etc.)
Screws diameter must be 5mm max. We
advice not to install the panel near
heating sources (radiators etc.)
Fix the incoming cable
with a tie.
Fixing screws  5mm max.
PAGE - 3
NOTIFIER ITALIA