Section 2: Service Adjustments; Resetting To Factory Defaults After Board Replacement - Sony KDL-19M4000 Service Manual

2-1. RESETTING TO FACTORY DEFAULTS AFTER BOARD REPLACEMENT

Traditional Service Mode is not available in this chassis. The only option for service technicians is to reset all of the settings to the Factory Default from
the Self Diagnostic screen.
CAUTION: Resetting the TV to the Factory Defaults will over-write all customer settings including Parental Lock setting. Before performing this reset,
contact the customer to determine what adjustments they have made.
1. Turn on the TV.
2. While holding down the button on the remote control, on the TV press and hold the MENU button until "reset" displays at the bottom left corner of
the screen.
The TV turns itself off, then turns back on again.
The Initial Setup screen displays.
3. Use the Initial Setup screen options to reset the TV to the factory settings.
KDL-19M4000
All manuals and user guides at all-guides.com

SECTION 2: SERVICE ADJUSTMENTS

RM-YD025
Button
KDL-19M4000
17