Step 4 - Two Protective Films
Screen protectors are shipped with a front and back protective
film. They are identified with a yellow tab as #1 and #2.
Step 5 - Prepping the First Film Protector
When the device screen is clean and prepped, begin to slowly
peel a small portion of the protective film using the tab noted
as #1. This will expose the tacky back-side of the screen
protector approximately one inch.
NOTE: Do not touch the exposed tacky side of the screen
protector.
MS-206-15-08-1.0
Copyright © 2015 ikeGPS
2