Figure 2.17 [System Information] Window - Fujitsu PRIMEQUEST 500A Series Installation Manual

CHAPTER 2 Setup
2.2.4.2 Specifying a user account for the certified service engineer in
charge
Specify a user account that will be used by the certified service engineer in charge for
maintenance purposes. The procedure is the same as that described in
"Registering user accounts."
engineer as CE.
2.2.4.3 Specifying the system name
Specify a name for the PRIMEQUEST system. Only users who are granted Admin
permission can change this name. This name is also used as the SNMP system name.
Procedure
1 Click [System]
The [System Information] window appears.
2-30
Specify the user permission for the certified service
→
[System Information].

Figure 2.17 [System Information] window

Section 2.2.4.1,
C122-E001-10EN