Enabling Wi-Fi Direct - Samsung SCH-R760 User Manual

Scanning and Connecting to a Wi-Fi Network
When you turn on Wi-Fi, your phone searches for available Wi-Fi
network access points (hotspots), then displays them in a pop-up
list.
From the Notifications bar, sweep your finger downward to
1.
display the Notification Panel.
Touch Wi-Fi to turn Wi-Fi On.
2.
When your phone completes a scan, a list of detected
3.
hotspots appears in the display.
Touch a Wi-Fi hotspot to connect.
4.
• If the Wi-Fi hotspot is open, you will be automatically connected.
(Open hotspots can require to you launch Browser and agree to a
set of network usage rules that appear in the Browser window.)
• If the Wi-Fi network is secured, enter a password at the prompt to
connect.
Adding a Wi-Fi Network Manually
Touch Home
1.
Wireless and networks
2. Touch Wi-Fi to turn the feature on.
Under Wi-Fi networks, touch Add Wi-Fi network, then enter
3.
values in these fields:
• Network SSID: Enter the name of the Wi-Fi Wireless Access Point.
• Security: Select the type of security used by the WAP.
Configuring Wi-Fi Settings
Configure your phone's Wi-Fi settings. (For more information,
refer to "Wi-Fi settings" on page 120.)

Enabling Wi-Fi Direct

Wi-Fi Direct allows device-to-device Wi-Fi connections so you
can transfer large amounts of data.
Touch Home
1.
Wireless and networks
Touch Wi-Fi Direct to enable Wi-Fi Direct. A green check
2.
mark appears in the check box.
Viewing Wi-Fi Direct Status
Touch Home
Wireless and networks
The Status field shows the Wi-Fi Direct status.
Menu Settings
Wi-Fi settings.
Menu Settings
Wi-Fi Direct settings.
Menu Settings
Wi-Fi Direct settings.
Connections 95